This block wall calculator answers the question every site asks first: I have a wall, how much do I buy? Enter the wall length and height, the block thickness (100, 150 or 200 mm) and the doors and windows, and it gives you the number of blocks (طابوق, also called block, بلوك or طوب), the cement bags and sand for the mortar, the cement and sand for plastering one or both faces, and the litres of primer and paint. Everything comes out as order quantities: whole blocks, whole 50 kg bags, cubic metres of sand and litres of paint, with waste included. It gives quantities only, in metric units, for villa, annex and boundary wall work in Dubai and the UAE.
How the wall calculator works
The calculator is the block calculator, the plaster calculator and the paint calculator chained together on one wall. All the factors below are typical values, not standards: the project specification and the product data sheets govern.
- Net wall area (one face) = length × height − doors × width × height − windows × width × height.
- Blocks per m² = 1 ÷ ((block length + 10 mm joint) × (block height + 10 mm joint)). A 400 × 200 mm block gives 11.61 per m², a 390 × 190 mm block gives 12.5. Blocks to order = net area × blocks per m² × (1 + breakage), rounded up. Default breakage is 5 percent.
- Block mortar = block thickness − blocks per m² × block length × block height × thickness, per m² of wall (full bedding). Hollow blocks are taken as bedded on 80 percent of that (an assumption, because the cross webs are only partly bedded); solid blocks on 100 percent. Mortar waste is 25 percent by default.
- Plaster = net area × number of faces × thickness × (1 + plaster waste). Defaults: 15 mm and 15 percent waste. Doors and windows are deducted on every plastered face; reveals and soffits are not added.
- Cement and sand from wet volume: dry volume = wet × 1.33 (cement and sand shrink when wetted, typical range 1.25 to 1.35). Cement = dry ÷ (1 + sand parts) × 1,440 kg/m³, divided by 50 kg per bag. Sand = dry × sand parts ÷ (1 + sand parts). The cement of the mortar and the plaster is added first and then rounded up to whole bags. Tonnes of sand use about 1,600 kg/m³ for loose sand (typical range 1,500 to 1,700).
- Paint = net area × faces painted × coats ÷ spreading rate × (1 + waste). Defaults: 2 coats at 10 m² per litre per coat and 10 percent waste. Primer = net area × faces ÷ 10 m² per litre × (1 + waste).
Lintels, bond beams, filled cores, reinforcement, skirting, door frames and trim are not included. For other plaster thicknesses and several wall types at once, use the plaster calculator; for paint on whole rooms, the paint calculator.
Worked example: a 10 m annex outer wall
A villa annex wall 10 m long and 3 m high with one door 1.0 × 2.1 m and two windows 1.5 × 1.2 m. 400 × 200 × 200 mm hollow blocks, 10 mm joint, 5 percent breakage, mortar 1 : 4 with 25 percent waste. Plaster on both faces, 15 mm of 1 : 4 with 15 percent waste. Two coats of paint at 10 m² per litre plus primer, 10 percent waste. These are the calculator's default numbers.
- Wall 30.00 m². Openings 2.10 + 2 × 1.80 = 5.70 m². Net area 24.30 m².
- Blocks: 24.30 × 11.614 = 282.2, so 283 blocks, and 297 with 5 percent breakage.
- Mortar: 0.2 − 11.614 × 0.4 × 0.2 × 0.2 = 0.01417 m³ per m², × 0.8 for hollow blocks = 0.01134. Wet 24.30 × 0.01134 × 1.25 = 0.344 m³, dry 0.458 m³. Cement 0.458 ÷ 5 × 1,440 = 131.9 kg (2.64 bags), sand 0.37 m³.
- Plaster: area 2 × 24.30 = 48.60 m². Wet 48.60 × 0.015 × 1.15 = 0.838 m³, dry 1.115 m³. Cement 1.115 ÷ 5 × 1,440 = 321.1 kg (6.42 bags), sand 0.89 m³.
- Cement to order: 131.9 + 321.1 = 453.0 kg = 9.06 bags, so 10 bags of 50 kg. Sand: 0.37 + 0.89 = 1.26 m³, about 2.0 tonnes.
- Paint: 48.60 m² × 2 coats ÷ 10 × 1.1 = 10.7 litres, and primer 48.60 ÷ 10 × 1.1 = 5.3 litres.
Other quick examples to try with the buttons above the calculator: a 30 m boundary wall 2.4 m high, 200 mm hollow blocks, plastered 20 mm 1 : 3 on both faces and painted, needs about 879 blocks, 40 bags of cement, 4.4 m³ of sand, 32 litres of paint and 16 litres of primer. A 6 m × 3 m annex partition in 100 mm blocks with one door, plastered 12 mm on both faces, needs about 197 blocks, 5 bags of cement, 0.6 m³ of sand, 7 litres of paint and 3.5 litres of primer.
Notes for Dubai and the UAE
- Concrete blocks in the UAE are commonly 400 × 200 mm on the face in 100, 150 and 200 mm thickness (4, 6 and 8 inch). Many suppliers quote 400 × 200 mm as a nominal size that includes the joint, which is an actual 390 × 190 mm block: if that is yours, choose 390 × 190. Lightweight and AAC blocks are laid with thin-bed adhesive, so the mortar figures here do not apply to them.
- External and boundary walls are usually 200 mm, internal partitions 100 or 150 mm. Plaster is commonly thicker and richer outside than inside, so use the average thickness when your two faces differ, or run the wall twice with one face each.
- The block type, strength class, mortar and plaster mixes and paint system are set by the approved drawings and specification, and by the consultant or Dubai Municipality requirements where they apply. The 1 : 4 mix and the factors above are common defaults, not requirements.
- Sand is normally ordered by the truckload and cement by the 50 kg bag; ask your supplier how a load is measured. Order a little over for breakage and keep cement dry and off the ground.
- In hot weather mortar and plaster dry quickly. Wet the blocks and cure fresh plaster as the consultant instructs.
This tool counts materials only. For the cost of the whole annex or villa, use the calculator in our app.
Frequently asked questions
How do I calculate the number of blocks and cement for a block wall?
Multiply the wall length by its height and subtract the doors and windows to get the net area. Multiply by 11.6 blocks per m² for a 400 × 200 mm block and add 5 percent for breakage. For the mortar the calculator takes the joint volume, converts it to dry cement and sand and rounds the cement up to whole 50 kg bags. For the wall above that is 297 blocks and about 2.6 bags of cement and 0.37 m³ of sand for the mortar.
How much cement and sand do I need to plaster one square metre?
For 15 mm of 1 : 4 plaster with 15 percent waste, about 6.6 kg of cement (0.13 of a 50 kg bag) and 0.018 m³ of sand per m². A 12 mm coat needs about 20 percent less and a 20 mm coat about a third more. The calculator does the sum for the area of your wall on one or both faces.
How many blocks per square metre of wall?
About 11.6 for a 400 × 200 mm block with a 10 mm joint, whatever the thickness, and 12.5 for a 390 × 190 mm block. Thicker blocks use more mortar and more weight, not more blocks per m².
Are طابوق, بلوك and طوب the same thing?
In the Gulf these words are used for the same concrete masonry units used to build walls. When you order, go by the size in millimetres and the block type rather than the name.
Does it include lintels, columns or the foundation?
No. It counts the blocks, mortar, plaster and paint of the wall itself. Concrete, steel and the foundation have their own calculators and come from the structural drawings.
Is the result exact?
It is a planning estimate based on the sizes and typical factors shown. The approved drawings, the specification and your engineer always govern the final quantities.